absorber plate मीनिंग इन हिंदी

उदाहरण वाक्य

1. Heat is transferred from the absorber plates of the collector in the fluid by conduction.
2. They consist of an absorber plate which air passes across or through as it scrubs heat from the absorber.
3. One way around this is to simply use the same material for both the piping and the absorber plate.
4. Based on absorber plate area, most evacuated tube systems are more efficient per square meter than equivalent flat plate systems.
5. Heat and infrared radiation ( IR ) are produced when short wave radiation light hits the absorber plate, which is then trapped inside the collector.
6. Evacuated tube collectors have a lower absorber plate area to gross area ratio ( typically 60 80 % of gross area ) compared to flat plates.
7. Prasad and Saini [ 1988 ] conducted experiments by varying the relative roughness pitch in the absorber plate and observed that the flow pattern downstream the ribs was a function of the relative roughness pitch.
8. Copper is used both in receivers and primary circuits ( pipes and heat exchangers for water tanks ) . but there may be similar problems with the heat transfer between the absorber plate and the pipes as well.
9. where " C 0 " is the collimation factor ( what fraction of the explosion plasma debris will actually hit the impulse absorber plate when a pulse unit explodes ), " V e " is the nuclear pulse unit plasma debris velocity, and " g n " is the standard acceleration of gravity ( 9.81 m / s 2; this factor is not necessary if " I sp " is measured in N�s / kg or m / s ).